Media added by Wraith

Navigation

Browse albums
Ready to roll

Ready to roll

  • 0
  • 0
A longer section put on to a base

A longer section put on to a base

  • 0
  • 0
Completed sections of wall plonked on to a dio base.

Completed sections of wall plonked on to a dio base.

  • 0
  • 0
I've added a very light drybrush of yellow ochre, just to inject a little colour and hopefully relieve the 'drab' look of grey over black.

I've added a very light drybrush of yellow ochre, just to inject a little colour and hopefully relieve the 'drab' look of grey over black.

  • 0
  • 0
With the initial all over black coat dried, a series of progressively lighter grey coats can be dry brushed over the stonework.

With the initial all over black coat dried, a series of progressively lighter grey coats can be dry brushed over the stonework.

  • 0
  • 0
Paint work begins with an all over coat of black, making sure all the nooks and crannies are covered.

Paint work begins with an all over coat of black, making sure all the nooks and crannies are covered.

  • 0
  • 0
With a couple of figures and a spare pile of loose stones.

With a couple of figures and a spare pile of loose stones.

  • 0
  • 0
The sections of walls, having had the stonework 'design' pressed in to them. Once the foam has been pressed in, it retains this shape.

The sections of walls, having had the stonework 'design' pressed in to them. Once the foam has been pressed in, it retains this shape.

  • 0
  • 0
Once happy with the general shape of the wall, use a ball point pen or pencil (or similar), to mark out a rough stonework pattern on the wall. Brickwo

Once happy with the general shape of the wall, use a ball point pen or pencil (or similar), to mark out a rough stonework pattern on the wall. Brickwo

  • 0
  • 0
Use the rasp to add shape to the wall, the rounded side is useful for this.

Use the rasp to add shape to the wall, the rounded side is useful for this.

  • 0
  • 0
Using a bastard file / rasp, roughen up all the edges of the foam.

Using a bastard file / rasp, roughen up all the edges of the foam.

  • 0
  • 0
Some basic shaping to replicate some damage to the wall section, using a knife. Doesn't need to be very precise.

Some basic shaping to replicate some damage to the wall section, using a knife. Doesn't need to be very precise.

  • 0
  • 0
Trimmed the thickness down a bit to suit

Trimmed the thickness down a bit to suit

  • 0
  • 0
Starting off with a couple of lengths of inch thick foam. Piece of cake.

Starting off with a couple of lengths of inch thick foam. Piece of cake.

  • 0
  • 0
PU Spartans 057

PU Spartans 057

  • 0
  • 0
PU Spartans 053

PU Spartans 053

  • 0
  • 0
PU Spartans 051

PU Spartans 051

  • 0
  • 0
PU Spartans 050

PU Spartans 050

  • 0
  • 0
PU Spartans 048

PU Spartans 048

  • 0
  • 0
PU Spartans 026

PU Spartans 026

  • 0
  • 0
PU Spartans 021

PU Spartans 021

  • 0
  • 0
PU Spartans 019

PU Spartans 019

  • 0
  • 0
PU Spartans 017

PU Spartans 017

  • 0
  • 0
Figarti - Target aquired

Figarti - Target aquired

  • 0
  • 0
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Back
Top