Fixing W.Britains tank skirting (1 Viewer)

[tora7770]

I have just received a Britains German panzer tank with a catipillar track skirting plate that has fallen off . Does anyone know what i should use to stick it on again?. Can anyone tell me what Britains would use in the first place to stick these so as much as possible i can use the same material.
Thank you in advance for your help
Andrew

 

[Ken & Ericka Osen/H&A Studio]

Almost all of the various 'polystone' vehicles and scenics made in this industry are made with various polyester resins with a filler. All of these can be effectivly bonded and repaired with any medium viscosity cyanoacrylate adhesives or 'super glue'. Minor chips and voids can be filled and repaired with any two-part epoxy putty sold at hobby shops for sculpting. Any paint can be used for touch up. If there is a slight difference in surface finish after the repair use one of the spray matt finishes such as Testor's Dullcoat over the entire vehicle.
These types of repairs can be used on any manufacturers vehicles and scenics. If you have any other questions please log on at the ONWTC website and forum to ask detailed instructions on the use and applications of any of these materials. Hope this helps, Ken Osen/Hudson & Allen Studio/ ONWTC

 

[Njja]

Thanks for the advice Ken, your input is always appreciated!

Njja

 

[Beaufighter]

Now that was some helpful & solid advice. I just learned something new in regards to the epoxy putty. Thank you.

 

[tora7770]

Thank you Ken,
i can now fix my tank skirting with confidence.
Regards
Andrew