For those of you lucky enough to attend the Chicago Show, which was a ton of fun, you will have seen two future releases from John's WWI Collection that he sent to Paul and myself. The reaction to these was terrific and thank you to all that placed advance orders. We hope these will be available in late October / November but the dates may change. Final pricing has not yet been set, so please wait until the official release.
BRITISH GUN CARRIER, MARK I, SUPPLY TANK VERSION
GWB-08 THE GREAT WAR,1914-1918 BRITISH GUN CARRIER, MARK I, SUPPLY TANK, 1st Gun-Carrier Company, Tank Corps, 6th August 1918
The British Gun Carrier, Supply Tank, will be sold as GWB-08, but will come in 2 boxes.
Both versions were previewed at the recent Chicago Toy Soldier Show, and will be released over the next few months.
Prices will be announced on release.
During 1916 it became clear that in case of a breakthrough, the very purpose of the first tank, the Mark I, artillery would have great trouble following the advancing troops. Any successful offensive would therefore be in danger of stalling immediately. To solve this problem Major Gregg, an engineer working for the main tank producing company Metropolitan, Carriage, Wagon and Finance, proposed to build special mechanised artillery, using parts of the Mark I. The production of a prototype was approved on 5 June 1916; the actual design began in July. The first prototype was ready to participate in the Tank Trials Day at Oldbury on 3 March 1917. An order of fifty vehicles was given to Kitson & Co. in Leeds. Deliveries to the army started in June and ended in July.
The vehicle bore little resemblance to the Mark I. The tracks weren't tall but low, almost flat. At the back a rectangular superstructure covered the Daimler 105 hp engine together with the transmission of the Mark I, the latter now in a reversed position. Sharing it were the vehicle commander, a mechanic and two gearsmen. The original double tail wheel of the Mark I, intended to aid steering and attached to the rear of the vehicle, was retained. The front was an open area with either a 60-pounder (5-inch) field gun or a 6-inch howitzer.
For transporting the gun only the wheels had to be removed from the gun carriage - these were attached to the side of the carrier until needed again. In theory, the field gun could be fired from the vehicle; in reality only the howitzer could be so used. Alternatively the guns could be unloaded through a pivoting cradle assisted by two winding drums driven by the engine. Above the front of the track frame at each side was an armoured cab for the driver on the left and the brakesman on the right. In the prototype these driving positions were directly in front of the superstructure; moving them forward improved visibility, but made communication very difficult - a problem as, in the Mark I, four men (including the gearsmen) had to cooperate to steer the tank.
In July 1917 two Gun Carrier Companies were formed of 24 vehicles each. Probably none of them ever fired a shot in anger. As breakthroughs never materialised the vehicles were ultimately only used as supply tanks. It was calculated a single tank had the same carrying capacity as 291 human porters.
COMPLETE SUPPLY TANK, WITH SUPPLIES
PICTURE WITH TANK RIDERS, TANK CREW, AND EXTRA SUPPLIES.
The extra supplies, tank crew etc, were not previewed in Chicago, so we have lots to look forward to.
BRITISH GUN CARRIER, MARK I, WITH 6-INCH HOWITZER
GWB-10 THE GREAT WAR,1914-1918 BRITISH GUN CARRIER, MARK I, WITH 6-INCH HOWITZER, 1st Gun-Carrier Company, Tank Corps, 6th August 1918
The British Gun Carrier, With 6-inch Howitzer, will be sold as GWB-10, but will come in 2 boxes.
The Gun Carrier Mark I was the first piece of self-propelled artillery ever to be produced.
Hope you enjoyed this preview of the upcoming releases.
Mike
Sierra Toy Soldier Company
BRITISH GUN CARRIER, MARK I, SUPPLY TANK VERSION
GWB-08 THE GREAT WAR,1914-1918 BRITISH GUN CARRIER, MARK I, SUPPLY TANK, 1st Gun-Carrier Company, Tank Corps, 6th August 1918
The British Gun Carrier, Supply Tank, will be sold as GWB-08, but will come in 2 boxes.
Both versions were previewed at the recent Chicago Toy Soldier Show, and will be released over the next few months.
Prices will be announced on release.
During 1916 it became clear that in case of a breakthrough, the very purpose of the first tank, the Mark I, artillery would have great trouble following the advancing troops. Any successful offensive would therefore be in danger of stalling immediately. To solve this problem Major Gregg, an engineer working for the main tank producing company Metropolitan, Carriage, Wagon and Finance, proposed to build special mechanised artillery, using parts of the Mark I. The production of a prototype was approved on 5 June 1916; the actual design began in July. The first prototype was ready to participate in the Tank Trials Day at Oldbury on 3 March 1917. An order of fifty vehicles was given to Kitson & Co. in Leeds. Deliveries to the army started in June and ended in July.
The vehicle bore little resemblance to the Mark I. The tracks weren't tall but low, almost flat. At the back a rectangular superstructure covered the Daimler 105 hp engine together with the transmission of the Mark I, the latter now in a reversed position. Sharing it were the vehicle commander, a mechanic and two gearsmen. The original double tail wheel of the Mark I, intended to aid steering and attached to the rear of the vehicle, was retained. The front was an open area with either a 60-pounder (5-inch) field gun or a 6-inch howitzer.
For transporting the gun only the wheels had to be removed from the gun carriage - these were attached to the side of the carrier until needed again. In theory, the field gun could be fired from the vehicle; in reality only the howitzer could be so used. Alternatively the guns could be unloaded through a pivoting cradle assisted by two winding drums driven by the engine. Above the front of the track frame at each side was an armoured cab for the driver on the left and the brakesman on the right. In the prototype these driving positions were directly in front of the superstructure; moving them forward improved visibility, but made communication very difficult - a problem as, in the Mark I, four men (including the gearsmen) had to cooperate to steer the tank.
In July 1917 two Gun Carrier Companies were formed of 24 vehicles each. Probably none of them ever fired a shot in anger. As breakthroughs never materialised the vehicles were ultimately only used as supply tanks. It was calculated a single tank had the same carrying capacity as 291 human porters.
COMPLETE SUPPLY TANK, WITH SUPPLIES
PICTURE WITH TANK RIDERS, TANK CREW, AND EXTRA SUPPLIES.
The extra supplies, tank crew etc, were not previewed in Chicago, so we have lots to look forward to.
BRITISH GUN CARRIER, MARK I, WITH 6-INCH HOWITZER
GWB-10 THE GREAT WAR,1914-1918 BRITISH GUN CARRIER, MARK I, WITH 6-INCH HOWITZER, 1st Gun-Carrier Company, Tank Corps, 6th August 1918
The British Gun Carrier, With 6-inch Howitzer, will be sold as GWB-10, but will come in 2 boxes.
The Gun Carrier Mark I was the first piece of self-propelled artillery ever to be produced.
Hope you enjoyed this preview of the upcoming releases.
Mike
Sierra Toy Soldier Company
