Adjusting a model's gun (1 Viewer)

[tora7770]

one of my w.britains models has the stock of the gun at a slight angle and not straight. Any advise how to move it into place?

 

[mestell]

When I have this kind of problem with one of my figures I just simply, very carefully, and vey slowly bend/straighten the errant feature back in place. I have done this with success using my fingers (if I can grip the piece in question) or by using a tweezer. CAUTION and CARE should be taken . . do it slowly with a series of adjustments . . . .
:smile2: Mike

 

[Napoleon1er]

I have found it is also helpful to to make sure the gun/sword is not cold, and if possible slightly warm. I do this by holding it between two fingers for a minute before I bend it. Often, If you just squeeze it firmly, that simple pressure will bend it back into shape.
-Sandor:salute::