Fubar
Sergeant Major
- Joined
- Jun 27, 2005
- Messages
- 1,921
Minor conversion work here with a BMC mount from a bag of Greek warriors, and a Reamsa recast crusader. Both approx 60mm .1st, I cut off his plastic spear, drilled out his hand and replaced with steel spear.Making steel wire spears is easy, if you have an anvil,ballpeen hammer and bench grinder.Grind the tip of the wire to a point, whack it on the anvil, grind on side of wheel.Took about 1 minute.
Had to carve away some on the saddle and horse, a little more on the Crusaders
to get a decent fit. Drilled and pegged rider to horse, epoxied, let dry.
Trimmed away on horses base, glued to a steel wargame base I also trimmed.
Black primer, paint from dark to light. Terrain the base with woodland scenics, a shot of Matte finish. Done.
Matches well in size with the KC mounted crusader I think.
Have a bunch of ther Reamsa/Jecsan El Cid Crusader figs. Paint up nice.
FUB
Had to carve away some on the saddle and horse, a little more on the Crusaders
to get a decent fit. Drilled and pegged rider to horse, epoxied, let dry.
Trimmed away on horses base, glued to a steel wargame base I also trimmed.
Black primer, paint from dark to light. Terrain the base with woodland scenics, a shot of Matte finish. Done.
Matches well in size with the KC mounted crusader I think.
Have a bunch of ther Reamsa/Jecsan El Cid Crusader figs. Paint up nice.
FUB