King and Country MG053 (1 Viewer)
- Thread starter rayusmc
- Start date
Obee
Captain
- Joined
- Aug 27, 2009
- Messages
- 5,916
I can't comment on this particular vehicle, but to remove the figure you would first have to inspect the figure to see if he is cast with the seat, or added onto the seat.
As the vehicle is resin (polystone?) and the figures are metal, the driver may be separate. If he is you will be able to see that and then I would work him loos by 'gentle pressure' of a craft knife blade to break the glue join.
If the seat is part of the figure, then the whole seat, with figure, would come out, and the only way to fix that is make another seat.
I hope that helps, but let me know about the driver/seat and even send images?
John
As the vehicle is resin (polystone?) and the figures are metal, the driver may be separate. If he is you will be able to see that and then I would work him loos by 'gentle pressure' of a craft knife blade to break the glue join.
If the seat is part of the figure, then the whole seat, with figure, would come out, and the only way to fix that is make another seat.
I hope that helps, but let me know about the driver/seat and even send images?
John
Thank you for replay - I will let you know what happen - I do not know how to send images - thanks again Larry
Success - cut hands at steering wheel and then I pried up - the whole seat came out ( which is fine ) then pried the figure from seat - there is a large pin on seat - I will grind that down and the hands on wheel - I do not know if this helped - - about 3 days ago - I pour fingernail polish on the figure and seat - thank you very much for your help - Larry