Length of LAH042 & LAH043 (1 Viewer)

[dspurlock]

Can someone please provide the measurement lengths of LAH042 LAH Headquarters and LAH043 LAH Annex. I am trying to figure out shelving space for the re-makes, thanks.

Derek

 

[Mitch]

11 inches in height 9 inches in length and just over 4 inches in depth for all structures. I believe the new versions are the same size also
Mitch

Can someone please provide the measurement lengths of LAH042 LAH Headquarters and LAH043 LAH Annex. I am trying to figure out shelving space for the re-makes, thanks.

Derek

 

[PanzerAce1944]

One thing I would add here for these building facades. I use one center HQ and 2 annexes,one on each side. All 3 Combined when placed on a shelf they are "heavy".
They will need to be placed on a platform that will not bow under the weight, otherwise you will get uneven gaps between each facade.

 

[dspurlock]

11 inches in height 9 inches in length and just over 4 inches in depth for all structures. I believe the new versions are the same size also
Mitch

Mitch,
Thank you for the measurements, now I have to figure out how to make it work with the 44 inches I have. Darn, it’s ½ inches too long for a double annex display. I’ll have to figure it out

One thing I would add here for these building facades. I use one center HQ and 2 annexes,one on each side. All 3 Combined when placed on a shelf they are "heavy".
They will need to be placed on a platform that will not bow under the weight, otherwise you will get uneven gaps between each facade.

Good point, I hadn’t thought about that. Do you think it’s heavier than the Nuremberg display? The Nuremberg display is a real heavy brink unto itself and it’s centered in the middle of my display case with no bowing.

Derek

 

[PanzerAce1944]

Mitch,
Thank you for the measurements, now I have to figure out how to make it work with the 44 inches I have. Darn, it’s ½ inches too long for a double annex display. I’ll have to figure it out



Good point, I hadn’t thought about that. Do you think it’s heavier than the Nuremberg display? The Nuremberg display is a real heavy brink unto itself and it’s centered in the middle of my display case with no bowing.

Derek

If you are planning on using two annexes and one center building, then yes it will be much heavier.Add to that the figures, etc that will go along with the display.
Recommend a good sturdy support shelf !

 

[dspurlock]

Another equally good point, thank you.

Derek

 

[Mitch]

I have one shelf made bespoke which has the center building and two annexes either side and has over two hundred troops on. It has five brackets holding it and its safe as houses even with the weight. As long as the shelves are secured properly to the wall it will hold.
Mitch

 

[ostrein]

I have one shelf made bespoke which has the center building and two annexes either side and has over two hundred troops on. Mitch

Picture ... please {sm3}

Oliver

 

[MapleLeaf]

Yes Mitch
Picture PLEASE

 

[dspurlock]

Yes Mitch
Pictures PLEASE

MapleLeaf, I edited your request :smile2: