Results 1 to 10 of 55

Thread: A bid of sculpting, casting and a little magic...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2009
    Location
    Bonn Germany
    Posts
    450

    Default A bid of sculpting, casting and a little magic...

    Hi,
    I did a bid of resin casting lately which some of you might find interesting.
    All figures are 70mm scale either sculpted by myself or altered by pure magic (see pictures).
    Silicone rubber (the light green stuff) used is a great knew product I have found recently
    made by a company called PUREX it is called PICOSIL-GRUEN, mixes 1:1 by volume
    and sets in about 30 minutes - fantastic stuff. It is supposed to work with low melt
    whitemetals as well but I could not test it yet. Vulcanised molds last for at least 50 castings in resin which is absolutley premium since the usual rate 15-20 castings. Mind you all my castings are one piece castings which does put a lot of stress to the molds due to the "Pulling-Forces" involved.
    Resin used was EazyFlow 60. Both rubber and resin was cured under ca. 90 PSI pressure resulting in absolutly bubble free molds and castings.
    Enjoy
    regards
    WolfgangName:  3.JPG
Views: 784
Size:  159.0 KBName:  1.JPG
Views: 748
Size:  205.8 KBName:  2.JPG
Views: 757
Size:  275.9 KB
    Likes: (11) christopher (01-10-2013),END TIMES (09-12-2016),fishead19690 (01-11-2013),Michael Seemann (03-20-2018),Napoleon1er (01-10-2013),pochmahone (11-24-2014),Poppo (11-21-2014),sunyi (01-15-2013),theBaron (01-09-2013),Wraith (01-10-2013)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •