Waterloo and Plancenoit Diorama Part II (3 Viewers)

[7th OVI]

Just a quick update, started to work on the second part of the story. It involves the church and elements of the town of Plancenoit. I am working on the walls, cemetery and a number of buildings. The first challenge is the church was on an elevated piece of ground making the figures placement and staying up a bit of a problem. I am also trying put a new supplier on laser cut diorama pieces, specifically the church pews used to fire over the 6-foot walls surrounding the church. Here are some images of the progress this week. Thx Chris

 

[BHogan]

Looking great! What are the dimensions of your diorama?

Brendan

 

[7th OVI]

Looking great! What are the dimensions of your diorama?

Brendan

The diorama will be 6 feet by 2 feet with a visual ceiling of 13 inches. Hope this helps. Thx Chris

 

[BHogan]

The diorama will be 6 feet by 2 feet with a visual ceiling of 13 inches. Hope this helps. Thx Chris

That is going to be something to see!

Brendan

 

[7th OVI]

Good morning, another update on the diorama. Made some progress on the church yard this week. Built laser cut church pews from a kit to be used as barricades and firing steps on the church walls. Finished off some headstones for the church yard. Began working on the placement of the figures around the church. And finally, worked on the internal lighting on the church to reflect the time of day and match the descriptions given by a number of narrators. Should be finished with this diorama in the next 2 weeks. Let me know what you think. Thx Chris

 

[Horus]

Nice work Chris on those fiddly bits and the dusk and night shots very effective

 

[mestell]

Chris, your attention to detail continues to impress. Very well done Sir . . .
Mike

 

[Hadrian]

Just a quick update, started to work on the second part of the story. It involves the church and elements of the town of Plancenoit. I am working on the walls, cemetery and a number of buildings. The first challenge is the church was on an elevated piece of ground making the figures placement and staying up a bit of a problem. I am also trying put a new supplier on laser cut diorama pieces, specifically the church pews used to fire over the 6-foot walls surrounding the church. Here are some images of the progress this week. Thx Chris

Do you have some information for me regarding the church please? Did you create it of your own? Model kit? Thanks for your reply

 

[BHogan]

This is going to be an exceptional diorama! I can't wait to see the finished product.

Brendan