News Update August 28, 2023 - Second World War German Armour - Tiger! (1 Viewer)

Julie

Administrator
Staff member
Joined
Feb 2, 2011
Messages
2,141
JJDESIGNS NEWS UPDATE 28[SUP]th[/SUP] AUGUST 2023
THE SECOND WORLD WAR
GERMAN ARMOUR
TIGER!

Without a doubt the most iconic tank of World War Two, the Tiger earned a deadly reputation and struck fear into the hearts of its Allied opponents in all theatres of war. Its undisputed battlefield superiority, based on its lethal cannon and superior armor protection, gained the Tiger an almost mystical reputation, particularly among its former enemies. Such was the fear of the Tiger that the sighting or mere mention of Tigers on the battlefield could cause enemy troops to panic.
JJD announce the release of the latest "big cat" and its first model of the iconic Tiger tank.

The following model will only be available for Pre-order until the 30[SUP]th[/SUP] SEPTEMBER 2023
PRE-ORDER PERIOD ENDS 30[SUP]th[/SUP] SEPTEMBER 2023
NO PRE-ORDERS WILL BE ACCEPTED AFTER THE 30[SUP]th[/SUP] SEPTEMBER 2023
GA-52.jpg

GA-52
THE SECOND WORLD WAR,
GERMAN ARMOUR, German Panzerkampfwagen "Tiger" Ausf. E (Sd.Kfz.181),
Initial Production, Tiger #123, schwere Panzerabteilung 502, Second Battle of Lake Ladoga, January 1943.

Design for the Tiger was carried out in earnest beginning in late 1939 with two competing designs by Dr.ing.h.c.F. Porsche K.G. of Stuttgart and Henschel & Sohn of Kassel (commonly referred to simply as Porsche and Henschel). The Porsche prototype incorporated a Krupp designed turret mounting an 8.8cm KwK / L56 gun while the Henschel design used a Rheinmetall turret mounting a 7.5cm KwK / L70 gun. The Rheinmetall designed Tiger turret was significantly smaller than the Krupp design and looked strikingly similar to the turret used on the later Panther. Of the two hull designs, the Porsche hull was much more technologically advanced. It envisioned use of electric engines and either an electric or hydraulic transmission whereas the Henschel design utilized a standard (yet powerful) gasoline engine and mechanical transmission. Due to a number of factors, including automotive design problems with the Porsche Tiger, Krupp's ability to maintain a monopoly on tank gun production, and the ease with which the Henschel chassis could be modified to accept the larger Krupp turret designed for its competitor, the final Tiger became a combination of the Porsche and Henschel designs. The 8.8cm / L56 gun Krupp turret (originally designed for the Porsche Tiger) was mated to the Henschel Tiger chassis...and gave us the legendary Tiger appearance. (Interestingly, a single complete Porsche Tiger served as a command tank and saw combat use with the schwere Panzerjager Abteilung 653, who were equipped with the Ferdinand/Elefant tank destroyer that used the Porsche Tiger chassis.)
GA-52_2_.jpg

Thus was born the final design of the Tiger. When introduced, it was the most powerful tank in existence, and its combination of firepower and armor protection outclassed all its Allied opponents. The Tiger's offensive punch was provided by the 8.8cm KwK 36 / L56 cannon. Derived from the equally iconic FlaK 36 dual purpose anti-aircraft/anti-tank cannon, the KwK 36 was capable of penetrating 100mm of armor at 1,000 meters. Coupled with a flat shooting trajectory and excellent optics, the Tiger's cannon was capable of first round hits out to 1,000 meters. There are numerous documented instances of the Tiger's cannon rounds penetrating the front hulls of T-34s and exiting the rear of the tank through the engine bay. Essentially, if a Tiger could hit an enemy tank it usually resulted in its destruction. The Tiger's firepower was complemented with exceptional armor protection, provided by 100mm of armor for the front of the hull and turret, 80mm for the sides and rear of the hull and turret, and 100-120mm for the gun mantlet. This armor protection was almost invulnerable to the 75mm guns of the Western Allies' tanks and the 76.2mm guns on the Russian T-34 and KV-1 tanks in the 1942-1943 time period. Only at extremely close ranges did Allied tankers have any hope of penetrating a Tiger's armor, and stories abound of Allied tankers watching in horror as their armor piercing rounds hit and harmlessly bounced off the Tiger's thick armor. One Tiger is known to have taken over 250 hits from enemy weapons of all calibres and survived. Together, the Tiger's excellent firepower and armor protection resulted in a tank that could destroy its enemy out to distances of up to 2,000 meters, but the Tiger's enemies had to close to within 200 meters to have any hope of defeating a Tiger. Lastly, and contrary to popular belief, the Tiger was not the "lumbering behemoth" it is often portrayed as. While its massive 56 ton weight could lead to the Tiger breaking through bridges or becoming bogged down in wet and muddy terrain, when employed on suitable ground the Tiger possessed good cross country mobility and was actually quite maneuverable. It had a tighter turning circle than the Sherman and also possessed the ability to counter-rotate its tracks, whereby it could have one track moving forward while the other track was moving in reverse. This procedure allowed the Tiger to essentially turn in place to quickly bring its cannon to bear or to face its thicker frontal armor towards the enemy.
GA-52_3_.jpg

While the Tiger's reputation became legendary, it had a less than glamorous combat debut. The first Tigers were issued to schwere Panzerabteilung 502 (s.Pz.Abt. 502) under the first organizational tables for a Tiger abteilung, where each platoon of four tanks consisted of two Tigers and two Panzer IIIs (both Panzer III Ausf. L and Ausf N were employed by s.Pz.Abt. 502). The Abteilung was assigned to Heeresgruppe Nord (Army Group North), who sent them to the Leningrad front in late August of 1942. This area of operations was characterized by forests with numerous streams and wet, swampy areas...terrain wholly unsuited for the Tigers! Consequently, the Tiger's combat debut on 22 September 1942 while attached to the 170. Infanterie Division was disastrous, with one of the four Tigers employed getting hit and breaking down due to engine failure while the other three Tigers got bogged down in the swampy terrain. While three of the four Tigers were recovered, the fourth Tiger remained bogged down until 25 November 1942, when it was finally blown up by German forces. Subsequent combat with the 170. Infanterie Division was limited in effectiveness, with the Tigers being limited to forest roads and tracks that could support their weight.
GA-52_4_.jpg

Following these initial combat operations, the s.Pz.Abt 502 saw a period of relative quiet in November and December, where maintenance and refitting was conducted and the Tigers and Panzer IIIs received winter camouflage consisting of large bands of whitewash painted over their Dunkelgrau basecoats. Additionally, the Tigers were fitted with sheet metal smokestacks over their engine exhausts, to hide the exhaust flames, which could be seen from a good distance. Then in January of 1943, the Russians launched Operation Iskra (Spark); named the Second Battle of Lake Ladoga by the Germans.
GA-52_5_.jpg


GA-52_6_.jpg

The JJ Designs Tiger represents Tiger #123 of s.Pz.Abt. 502, as it appeared during the Second Battle of Lake Ladoga in January 1943. One of the initial Tigers produced, it carries the distinctive features of these early tanks along with those of s.Pz.Abt. 502:
- early turret with two rear pistol ports and no escape hatch
- early style smooth gun mantlet
- early style thin front mudguards
- a Panzer III Rommelkiste (turret stowage bin) fitted to the rear of the turret
- no side mudguards, because Tiger #123 was produced without mounts for them
- elongated sheet metal smokestacks fitted to the engine exhaust (a field modification unique to s.Pz.Abt. 502)
- the forward outer road wheels removed; this modification was employed by multiple Tiger units on the East Front to aid in minimizing the buildup of dirt and mud in the tracks
- Dunkelgrau base paint color with wide bands of winter whitewash
- s.Pz.Abt. 502's "Mammut" (Mammoth) unit insignia painted on the right front glacis plate and above the rear turret stowage bin
- white outline numbers and Balkenkreuz

The JJD Tiger also comes with the following features:
- all turret hatches open
- detailed turret and hull interior
- opening engine hatch with detailed engine

GA-52_7_.jpg


GA-52_8_.jpg

Many thanks once again to Steve “Hunter Rose”.
PRE-ORDER PERIOD ENDS 30[SUP]th[/SUP] SEPTEMBER 2023
PRODUCTION PERIOD WILL START NOVEMBER 2023
ESTIMATED SHIPMENT AVAILABLE JANUARY 2024

john jenkins
 
While early-model Tiger tanks have been made to excess in recent years (thanks to War Park and K&C among others) John has managed to make his tank just different enough as an initial-production Tiger to differentiate from the crowd… And it’s got the customary full interior. I’m sold!

BTW, Forces of Valor made a decent diecast metal 1/32 scale model of an early Tiger from Schwere Panzerabteilung 502 last year, though the JJD model will be much superior…

IMG-7200.jpg


IMG-7201.jpg
 
Last edited:
Looks great! It makes me think of one of my very favorite tigers, K & C's WS177 and its two great figures. Congrats to JJD and HR for this impressive big cat!
 
Now, here’s something novel that’s never been done: a Tiger.
 
Now, here’s something novel that’s never been done: a Tiger.

Tiger 1's sell, i have enough, 11 K & C Tiger 1's, i got the new one in June 2023, it is excellent. No doubt JJD one will be excellent and it is is a good version to make, i think many people will be very happy with it. I just wish he produced them without the internal detail. Would make it cheaper and bring it into a lot more people's budget, know i am not the first to say this,.

I wonder if we will be seeing any tankers for this and the Panther.........
 
Well, at least it wasn't the 143rd version of a Wittmann Tiger.:rolleyes2: -- Al

Totally agreed… While I’d have much rather this be a mid or late production Tiger I to go with the rest of John’s late war German armor, I do have to admire John’s creativity in choosing an initial production model from one of the first battles the type was involved with. It’s just different enough to not be yet another duplicate of the War park and K&C Tiger early production Tiger models and it will distinguish itself with the full interior and attention to detail John puts in all his WWII AFVs
 
Glad folks like the initial production Tiger. Other manufacturers have done Tigers, sure (it is THE most iconic tank of the war after all), but I think JJD's total package of excellent detail, attention to historical accuracy, and functionality with interior detail, engine bay detail, and all hatches being functional sets it apart from the competition.

However, what I really want to hear is what Frank (fmethorst) thinks of the updated red oxide primer color? ;)
 
I know it’s only 1/32 but the best tank produced in this hobby was the first Figarti Tiger. Fully exposed interior and metal tracks.
 
I know it’s only 1/32 but the best tank produced in this hobby was the first Figarti Tiger. Fully exposed interior and metal tracks.

Brad,

Although the 1/32 Figarti Tiger with full interior and crew is a wonderful model, I actually don't think it was even Figarti's best Tiger. Moreover, I think FL's and WP's Tigers are better models than any of Figarti's various Tigers.
 
Brad,

Although the 1/32 Figarti Tiger with full interior and crew is a wonderful model, I actually don't think it was even Figarti's best Tiger. Moreover, I think FL's and WP's Tigers are better models than any of Figarti's various Tigers.

I don’t have them Joe but I don’t believe they have a full interior and I believe only WP has metal tracks. You can remove the turret like you can with the JJD one but then you can remove the top of the tank to show the full interior.
 
Out of curiosity, what makes a model “the best” in peoples mind?
 
Last edited:
Well just wait till JJD releases the large Carthaginian war elephant. - You can lift off the howdah from its back and see the insides of the elephant. All biologically accurate, down to the smallest detail.
 
Out of curiosity, what makes a model “the best” in peoples mind?

Historical accuracy.

Detail without going over the top so that you can actually touch it without fear.

Decent paint job/weathering that doesn't look like man-made RE weathering.

Just nice to, open something you pay a lot of money for and dont think well this is a waste of money doest reach expectations for the price.
 

Users who are viewing this thread

Back
Top