Size Compatibility of TCS and K&C Armor and Figures (1 Viewer)

K

katana

Command Sergeant Major
Joined
Oct 7, 2010
Messages
2,473
The Armor and Figures of TCS and K&C are very compatible when combined in a Diorama. The photo shows the TCS Kingtiger with the K&C Jagdpanther in a Winter setting. The Figures are a combination of TCS and K&C intermingled. The K&C Panzer Kommander fits perfectly into the TCS Kingtiger.DSCF3050.JPG
 
Very nice photo. Think the best you've done so far.

Brad
 
TCS and First Legion are at least compatible with their own figures. TCS is 1/28 in both armor and figure scale and FL is 1/30 in both armor and figure scale for WWII. Other lines vary. TCS, Conte, TG and FL Romans are all size compatible. FL, Figarti and TG Armor are size compatible; but K&C varies. The K&C Winter Jagdpanther BBG-072 is 1/30; but the Kingtiger BBG-016 is 1/28 about the same size as the TCS Kingtiger. Very strange size variation IMO!
 
katana said:
TCS and First Legion are at least compatible with their own figures. TCS is 1/28 in both armor and figure scale and FL is 1/30 in both armor and figure scale for WWII. Other lines vary. TCS, Conte, TG and FL Romans are all size compatible. FL, Figarti and TG Armor are size compatible; but K&C varies. The K&C Winter Jagdpanther BBG-072 is 1/30; but the Kingtiger BBG-016 is 1/28 about the same size as the TCS Kingtiger. Very strange size variation IMO!
Click to expand...

Not all TCS AFV are 1/28 some of the earlier Tigers are 1/30 and K&C did two KT's one would be 1/30 the other might not be 1/28


Mark
 
The K&C Porsche Turret Kingtiger is 1/30 scale and some comments on the Forum at the time of its release indicted dissatisfaction at the small size in relation to the oversize figures. The next K&C Kingtiger was the Henschel Turret version and the size increased to 1/28 scale; about the same size as the TCS Kingtiger, which was more size compatible with the figures. I agree that the first TCS Tiger I was 1/30 scale and the later versions are 1/28 scale to better match the oversize figures from TCS, K&C and TG.
 
Doubt it.. TCS WW2 Germans are taller and thicker than FL germans.. If TCS made the same size as first legion, we would have almost everything we need!!

katana said:
TCS and First Legion are at least compatible with their own figures. TCS is 1/28 in both armor and figure scale and FL is 1/30 in both armor and figure scale for WWII. Other lines vary. TCS, Conte, TG and FL Romans are all size compatible. FL, Figarti and TG Armor are size compatible; but K&C varies. The K&C Winter Jagdpanther BBG-072 is 1/30; but the Kingtiger BBG-016 is 1/28 about the same size as the TCS Kingtiger. Very strange size variation IMO!
Click to expand...
 
What I said was that both TCS and FL figures and armor are size compatible within the respective companies; not with each companys WWII products. TCS figures and armor are 1/28. FL are 1/30. I agree it would be great for collectors if all the Toy Soldier manufacturers made their products in the size/scale they advertise. FL, WB and Kronprinze are the only true 60mm WWII figure manufacturers. FL, Figarti and TG are the only 60mm Armor manufacturers. K&C and TCS have made armor in a wide range of scales from 1/32 to 1/28.

daruss said:
Doubt it.. TCS WW2 Germans are taller and thicker than FL germans.. If TCS made the same size as first legion, we would have almost everything we need!!
Click to expand...
 
TCS and K&C have been very close in size with each other IMO, at least as far as WWII is concerned !

Wayne
 
I agree about WWII figures; but K&C armor has ranged from 1/32 to 1/28 scale. TCS armor has been consistent at 1/28 scale, except for the first Tiger I.

PanzerAce1944 said:
TCS and K&C have been very close in size with each other IMO, at least as far as WWII is concerned !

Wayne
Click to expand...
 
OzDigger said:
I will Stop buying TCS if they reduce the scale of their products to match the small First Legion size.
Click to expand...

Matt,

have to agree with you on that one. I currently buy TCS because it's 1/28 and in scale with K&C and TGM figures

Mark
 
Only TCS WWII figures are 1/28. The Roman figures are 1/30. Several manufacturers have different scales in different lines. TG is another example; WWII figures are 1/28 (65-68mm) and Romans are 1/30 (58-62mm). Ditto K&C. Make no since why one line is larger than the others IMO.
 
K/C made two King Tigers ....The first one was 1:32 smaller with the Porche turret and the second was 1:30th Henshel turret.....K/C figures are generaly 1:28th scale thus are compatible with TCS......Neither are compatible with FL or Figarti Armour which are 1:30th
 
The best armor available in true 1/30 scale as measured is made by FL, Figarti, TG, Honor Bound and Eagle Design. Other manufacturers are either 1/32 or 1/28 or vary in their armor scale over time. K&C can be anywhere between 1/32 and 1/28 depending upon when it was made.

A 1/30 scale Kingtiger hull should measure 9.5 inches long and 4.9 inches wide. The K&C BBG 016 Kingtiger measures 10.5 inches long and 5.0 inches wide. Significantly larger than 1/30 scale and about the same size as the TCS Kingtiger; both go wonderfully with the 1/28 scale figures. A Figarti Kingtiger, if it ever appears will be the first accurate 1/30 scale Kingtiger and it should be size compatible with FL figures in both size and quality, as is other Figarti armor IMO.

daruss said:
Please TCS, make your ww2 the same size as FiRST LEGION!
Click to expand...
 
You might have to take ED out out that list as, if I remember correctly, King Tiger and VW Beetle are both 1:28, not 1:30. But I guess I digress.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Back
Top