PanzerAce1944
Colonel
- Joined
- Feb 27, 2011
- Messages
- 8,632
Happy to say after waiting my Stuka has landed today ! What a challenge in 1/30 scale this bird has been. Opened the box and found the left rear tail section loose, the
support for this piece broken off, and the left landing gear assembly hanging ! {eek3} Luckily Some super glue was on hand and all 3 problems were fixed. I also wound up using some flat black paint to go over the rear tail section line that had been glued and it blended in well with the factory finish........Luckily all turned out fine.
If any out there are waiting for their plane to arrive, just be prepared to make a minor repair. The foam packing inside the box is quite adequate,but who knows what
torture this plane has been through in transit. Glad Figarti went ahead and made it and quite happy with the plane overall !!!
support for this piece broken off, and the left landing gear assembly hanging ! {eek3} Luckily Some super glue was on hand and all 3 problems were fixed. I also wound up using some flat black paint to go over the rear tail section line that had been glued and it blended in well with the factory finish........Luckily all turned out fine.
If any out there are waiting for their plane to arrive, just be prepared to make a minor repair. The foam packing inside the box is quite adequate,but who knows what
torture this plane has been through in transit. Glad Figarti went ahead and made it and quite happy with the plane overall !!!